: Make sure the vehicle is on a flat level surface.
: Make sure the tire pressures are within specification.
: Make sure that only the manufacturers' recommended four wheel alignment
equipment is used.
: Make sure the vehicles fuel tank is full, if not distribute extra weight
evenly over the fuel tank area to represent a full tank of fuel.
: Make sure there are no heavy objects in the vehicle.
: Make sure the air suspension is set to NORMAL ride height.
: Make sure the steering is in the straight ahead position.
: Make sure the slip plates (turntables) are free to move before adjusting
the geometry.
:
.
.
.
.
.
.
.
:
.
: Make sure the toe link anti-rotation tang is fully seated in the
integrated body frame before tightening the toe link retaining nut.
Failure to follow this instruction will result in damage to the toe link
or integrated body frame.
:
.
:
.
.
: Make sure the slip plates (turntables) are free to move before adjusting
the geometry.
.
.
.
.
.
.
: Do not work on or under a vehicle supported only by a jack. Always
support the vehicle on safety stands.